Yokogawa µR20000 - Manual (Page 92)

7-17 SM 04P02B01-01E
Replacing Parts
7
7.5 Disassembly Procedure (Dot Model)
6. Remove the two screws securing the Pulley Bracket.
(Screw tightening torque: 0.59 to 0.69 N·m).
Screw
Pulley Bracket
Screw
Removing the Pulley
7. Release the Pulley Bracket latch. Remove the Belt from the Pulley Assembly.
Pulley Assembly
Latch
Pulley
Shaft
Collar
Removing the Carriage Assembly
7. Remove the screw securing the Adjust Shaft Assembly, then pull out the Main
Shaft and Adjust Shaft Assembly from the internal unit and Carriage Assembly.
(Screw tightening torque: 0.59 to 0.69 N·m).
Adjust Shaft Assembly
Screw
Main Shaft
When removing the Adjust Shaft Assembly, see section 4.3, “Adjusting the
Height of the Carriage.”
Carriage Assembly
Main Shaft
Adjust Shaft Assembly