Yokogawa µR20000 - Manual (Page 84)

7-9 SM 04P02B01-01E
Replacing Parts
7
6. Remove the two screws securing the Shaft.
(Screw tightening torque: 0.59 to 0.69 N·m).
Screw Screw
Main Shaft
7. Remove the Belt, then pull the Frame to widen, and remove the Shaft.
Shaft
Plotter Carriage
Removing the Plotter Motor
8. Remove the two screws securing the Plotter Motor.
(Screw tightening torque: 0.20 to 0.26 N·m).
Screw
Screw
Removing the Lever Assembly
8. Remove the screw securing the Lever Assembly.
(Screw tightening torque: 0.20 to 0.26 N·m).
Lever Assembly
Screw
7.4 Disassembly Procedure (Pen Model)