Yokogawa µR20000 - Manual (Page 86)

7-11 SM 04P02B01-01E
Replacing Parts
7
7.4 Disassembly Procedure (Pen Model)
5. Remove the screw securing the Pen Base Bracket and Servo Top Cover.
(Screw tightening torque: 0.39 to 0.49 N·m).
Screw
6. Remove the Servo Top Cover from the Pen Base Bracket.
7. Remove the FPCs connected to the Pen Servo PBCs.
FPC
8. Remove the Pen Servo PCBs which are secured by latches to the Pen Servo
Assembly.
Latch
Note
The connectors connected to the FPCs from the Pen Servo Assembly on the Pen Servo
PCBs do not have a locking mechanism. Inserting and removing them repeatedly can result
in worn and defective contacts.