Yokogawa Multi Channel Oxygen Analyzer System ZR22/AV550G - Manual (Page 61)

A-12
IM 11M12D01-61E
208 2208 CH1_DETC – – Denotes the type of the channel-1 detector.
209 2209 CH2_DETC – – Denotes the type of the channel-2 detector.
210 2210 CH3_DETC – – Denotes the type of the channel-3 detector.
211 2211 CH4_DETC – – Denotes the type of the channel-4 detector.
212 2212 CH5_DETC – – Denotes the type of the channel-5 detector.
213 2213 CH6_DETC – – Denotes the type of the channel-6 detector.
214 2214 CH7_DETC – – Denotes the type of the channel-7 detector.
215 2215 CH8_DETC – – Denotes the type of the channel-8 detector.
216 2216 AV550G_STATUS – – Denotes the alarm/failure status of the control card.
217 2217 CH1_STATUS – – Denotes the alarm/failure status of channel 1.
218 2218 CH2_STATUS – – Denotes the alarm/failure status of channel 2.
219 2219 CH3_STATUS – – Denotes the alarm/failure status of channel 3.
220 2220 CH4_STATUS – – Denotes the alarm/failure status of channel 4.
221 2221 CH5_STATUS – – Denotes the alarm/failure status of channel 5.
222 2222 CH6_STATUS – – Denotes the alarm/failure status of channel 6.
223 2223 CH7_STATUS – – Denotes the alarm/failure status of channel 7.
224 2224 CH8_STATUS – – Denotes the alarm/failure status of channel 8.
225 2225 IPL_SOFT_REV – – Denotes the software revision of the IPL.
226 2226 CONTROL_SOFT_REV – – Denotes the software revision of the control card.
227 2227 CH1_SOFT_REV – – Denotes the software revision of channel 1.
228 2228 CH2_SOFT_REV – – Denotes the software revision of channel 2.
229 2229 CH3_SOFT_REV – – Denotes the software revision of channel 3.
230 2230 CH4_SOFT_REV – – Denotes the software revision of channel 4.
231 2231 CH5_SOFT_REV – – Denotes the software revision of channel 5.
232 2232 CH6_SOFT_REV – – Denotes the software revision of channel 6.
233 2233 CH7_SOFT_REV – – Denotes the software revision of channel 7.
234 2234 CH8_SOFT_REV – – Denotes the software revision of channel 8.
235 2235 REMOVE_ALARM_CH 1 – Shows that channels in an oxygen concentration alarm status
are excluded from averaging processing.
236 2236 ALARM_SUM 0 O/S, AUTO Denotes the block-wide alarm status. Can only be set to
“Disable.”
237 2237 TEST_1 – – A parameter for internal use only. No access allowed.
238 2238 TEST_2 – – A parameter for internal use only. No access allowed.
239 2239 TEST_3 – – A parameter for internal use only. No access allowed.
240 2240 TEST_4 – – A parameter for internal use only. No access allowed.
241 2241 TEST_5 – – A parameter for internal use only. No access allowed.
242 2242 TEST_6 – – A parameter for internal use only. No access allowed.
243 2243 TEST_7 – – A parameter for internal use only. No access allowed.
244 2244 TEST_8 – – A parameter for internal use only. No access allowed.
245 2245 TEST_9 – – A parameter for internal use only. No access allowed.
246 2246 TEST_10 – – A parameter for internal use only. No access allowed.
247 2247 TEST_11 – – A parameter for internal use only. No access allowed.
248 2248 TEST_12 – – A parameter for internal use only. No access allowed.
249 2249 TEST_13 – – A parameter for internal use only. No access allowed.
250 2250 TEST_14 – – A parameter for internal use only. No access allowed.
Appendix1-3_7.ai