Yokogawa AXFA14G/C - Manual (Page 35)

IM 01E20F12-01E 5-11
5. EXPLANATION OF BASIC ITEMS
(4) Resetting or Presetting Total Value
Select type and entry the adequate numeric in each
[Totalizer Reset] submenu.
Figure 5.5.15 Totalizer Reset Setup
5.5.5 DI Block Parameters Setup
There is one submenu as [Batch Information]. The
AXF has 2 Discrete Inputs and their setting contents
are same. The following figure is the [Discrete Input 1]
menu.
Click [Output] → [Discrete Input 1] or [Discrete Input
2] at the Navigation tree.
Refer to section 6.3.4 for [Simulation] function.
Figure 5.5.16 Discrete Input 1 menu
(1) Limit Switch setting
Select type and entry data for Limit Switch 1 and 2
adequately at [DI Set] in the [Transducer Block] menu.
Figure 5.5.17 Limit Switch Setup
(2) Channel setting
Select the adequate type at [Channel] in each [Discrete
Input] menu.
Figure 5.5.18 Selection of Channel Setup