Yokogawa AXFA14G/C - Manual (Page 14)

IM 01E20F12-01E 3-7
3. GETTING STARTED
Starting DTM Works
In the FieldMate window (as shown in the Figure
3.7.1), click the icon of the device at its Main Window.
Next, select [AXF PA V1.1] and click [OK] when the
following small window was appeared.
Figure 3.7.4 Select Device DTM
The DTM Works starts to open, and the following new
window is appeared. It is able to set parameters of the
AXF in detail.
Figure 3.7.5 DTM Works
Refer to Chapter 5 how to operate the AXF in the
FieldMate R1.03 for detail.