Watlow Silver Series Addendum - Manual (Page 44)

Silver Series OIT  44  Watlow Addendum
Optional: To see what you are copying from the controller to the OIT’s recipe memory, create an
object displaying the current value in the controller next to each Data Transfer (Trigger-based)
object. Create a label that indicates what the fields are such as “Current Controller Values”.
Optional: To see or edit
directly what is saved in
recipe memory create a
data entry object for each
recipe item. These objects
should display the values
of the data in the RW
memory at the recipe
addresses. Create a label
that indicates what the
fields are such as “Recipe
Values”.
(068)
Optional: The values in
the RW addresses are
automatically saved in
non-volatile memory
every five minutes, but
adding a button that
momentarily sets LB-
9029 forces the values to
be saved and can avoid
lost data in the event the
power is shut off too soon
after editing a recipe.
Optional: If you want to
store more than one recipe
in the OIT, set up the data
transfer objects to use
indexing for the RW
addresses.
(071)