Watlow Silver Series Addendum - Manual (Page 12)

Silver Series OIT  12  Watlow Addendum
6) In the System
Parameter
Settings dialog, in
the Device List,
select the Local
PLC 1 device and
click Settings…
(002)
7) For PLC type,
choose the
appropriate driver.
See the table
below.
8) For PLC I/F,
choose the
appropriate
hardware interface.
See the table
below.
9) For PLC default
station no. type
the controller’s
address. Typically
this is 1 for the
first controller.
10) Click Settings… (003)
For part numbers like… with… For PLC type choose… For PLC I/F choose…
STxx-xxx-xxxx
PMxxxxx-1xxxxxx
RMCxxxx-xxxx1xx
RMHx-xxxx-x1xx
RMLx-xxxx-x1xx
RMSx-xxxx-x1xx
Modbus RTU Modbus RTU Master RS-485 2W