Watlow Silver Series Addendum - Manual (Page 33)

Silver Series OIT  33  Watlow Addendum
Note: Pick a range of addresses with room to store all the data that must be displayed. For example, use
200 for the first parameter to be logged then for each additional parameter increment the address by
the size in words of the previous data. For example, typically you log floats such as process
variables and set points which each require two words to store. In that case if the first process
variable is copied to 200, set the next parameter to copy to 202 so on. In this example, a process
variable, a set point and the heat output power are logged.
• Click OK.
3) Click Exit to close the
Data Transfer (Time-
based) Object window.
(043)
To set up data sampling to log the data:
1) From the Objects
menu choose Data
Sampling.
2) Click New…
(044)