Watlow Silver Series Addendum - Manual (Page 29)

Silver Series OIT  29  Watlow Addendum
• Connect the USB cable to a USB port on the computer.
• If this is the first time you have connected the OIT to the computer via the USB port, locate a
follow the procedure in the EasyBuilder 5000 help, “How Do I Install the Maple Systems USB
driver?”
3) In EasyBuilder5000
from the Tools menu,
choose Download.
4) Select Ethernet or
USB cable.
5) For Ethernet, in HMI
IP select or enter the
OITs IP address.
6) Set Password to the
OITs password
(111111 by default).
7) Check Firmware, if
not already checked.
8) Check Reboot HMI
after download, if not
already checked.
9) Click Download.
(035)
10) Once the download is complete, click Exit.