Programming tutorials, Create a first project, Chapter 4: programming tutorials – Watlow Silver Series Addendum User Manual
Page 11

Silver Series OIT
11
Watlow Addendum
Chapter 4: Programming
Tutorials
The following sections guide you through creating a first project using EasyBuilder5000 and a Silver
Series OIT that communicates with a Watlow controller.
Create a First Project
The following procedure guides you through the process of configuring a Silver Series OIT to
communicate with a Watlow Controller.
1) To launch
EasyBuilder5000:
on the Windows
task bar click
Start, click All
Programs, click
Watlow, click
EZware-5000 and
click EasyBuilder
5000.
2) In the Welcome to
EasyBuilder5000
dialog, for Model,
choose the OIT
model you have.
3) For Display Mode
choose Landscape.
4) Make sure Use
template is
selected.
5) Click OK.
(001)
Note: If you have previously created a project, that project will open. In
that case from the File menu, choose New to create a blank project for
this tutorial and to see the Welcome dialog.
Note: The TS00-0070-0000 and TS00-0100-0000 are supported by the
same driver.
Note: The TS00-0043-0000 and TS00-0043-E000 are supported by the
same driver.
4