beautypg.com

Compile and download the project – Watlow Silver Series Addendum User Manual

Page 28

background image

Silver Series OIT

 28 

Watlow Addendum

19) Position the cursor and

click to place the
function key.

20) From the File menu

choose Save.

(032)

Compile and Download the Project

This example assumes you have a project that is ready to compile and load into an OIT.

To compile the project:

1) From the Tools menu,

choose Compile.

2) Click Compile.

3) After the project is

compiled, click Close.

(034)

To download via Ethernet or via a USB cable:

1) If downloading via Ethernet, determine the OIT’s IP address:

• If you don’t already know the OIT’s IP address, follow the instructions in Determining or

Setting the OIT’s IP Address on page 4, note the IP address for use below.

2) If downloading via a USB cable:

• Connect the USB cable to the OIT.
• Apply power to the OIT.