Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 54)

54
Maintenance Options
Options Items
CANopen Cables and Connectors Parts
Reference Name Reference Number Description
Installation Nut PFXZGMNT1 Nut to install the display module (10 pcs/set).
Socket Wrench PFXZGMSW1 Socket wrench to tighten and loosen the display installation
nut.
Accessories Kit PFXZGMAK1 Anti-rotation tee, USB cable clamp to prevent disconnection
(Type A, mini-B, for 1 port), 2 mm-high spacer to adjust
installation panel thickness (1pcs/each).
DC Power Supply
Connector PFXZGMCNDC1 Connector to connect DC power supply cable (5 pcs/set).
DIO Connector for
LT4000M PFXZLMCNIO1 15-pin I/O connector (Connector A x 1, Connector B x 1) and
6-pin I/O connector (Connector C x 1, Connector D x 1).
NOTE: Connector A and B are different and connector C and
D are different.
Reference Name Reference Number Description
Screen Protection
Sheet LT-4201TM: CA6-DFS4-01 Disposable, dirt-resistant sheet for the unit’
screen (5 sheet/set) (hard type).
LT-4301TM: PFXZCBDS61
Reference Number Manufacturer Description
Recommended
Cable
Connector XM2D-0901 OMRON Co. DSUB 9-pin socket
TSXCANKCDF180T Schneider Electric Straight connector with terminal
selector switch.
VS-09-BU-DSUB/CAN PHOENIX CONTACT Connector with terminal block and
terminal selector switch
SUBCON-PLUS-CAN/AX PHOENIX CONTACT Straight connector with terminal
selector switch
CANopen
Recommended
Transfer Cable TSXCAN CA50
TSXCAN CA100 Schneider Electric Cable for CANopen (IEC60332-1)
50 m/100 m.
TSXCAN CB50
TSXCAN CB100 Schneider Electric UL-approved cable for CANopen
(IEC60332-2) 50 m/100 m.