Proface LT4300M - 5.7 Modular HMI + Control" - Manual (Page 29)

LT-4201TM/4301TM Hardware Manual
29
WARNING
UNINTENDED EQUIPMENT OPERATION
 Use appropriate safety interlocks where personnel and/or equipment hazards exist.
 Install and operate this equipment in an enclosure appropriately rated for its intended
environment.
 Use the sensor and actuator power supplies only for supplying power to the sensors or
actuators connected to the module.

Power line and output circuits must be wired and fused in compliance with local and national
regulatory requirements for the rated current and voltage of the particular equipment.
 Do not use this equipment in safety-critical machine functions.
 Do not disassemble, repair, or modify this equipment.
 Do not connect any wiring to unused connections, or to connections designated as Not
Connected (N.C.).
Failure to follow these instructions can result in death, serious injury, or equipment
damage.