Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 44
Chapter 2 Specifications
2-15
Removal
(1)
Unlock the connector that has been locked in the mounting procedure. (Turn the lock ring as shown so
that the small
U
mark is displaced from the
V
mark). Then, pull out the cable by holding the cable
connector.
•
To disconnect the cable, be sure to hold the cable connector and pull it out. If you hold other
parts of the cable (lock ring, etc.), the cable cannot be disconnected.
2. Pull out the cable by holding the cable connector.
1. Turn the lock ring to unlock the connector.
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"