Installation prerequisites for standards, Ce marking – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 11

10
Installation prerequisites for standards
•
UL listed products
*1
•
c-UL listed products
*1
•
Product List
UL/c-UL File No.: E220851
For the detailed certification's information, refer to the Pro-face Home page.
Be aware of the following item when building the GP into an end-use product:
•
The GP unit must be used indoors only.
*1 The system constructing the following three components conform to UL/c-UL standards:
•GP3000H
•GP3000H Direct-connect Cable (with connector)
GP3000H-CBLHD-10M, GP3000H-CBLSD-3M, GP3000H-CBLSD-5M, GP3000H-CBLSD-10M
•GP3000H Conversion Adapter
AGP3000H-ADPCOM-01
The safety certificate can be downloaded from Pro-face Home Page.
Home Page URL
http://www.pro-face.com/
CE Marking
The following units are CE marked products complying with the EMC Directive.
For the detailed information on CE Marked, be downloaded and refer the Declaration of Conformity from Pro-face Home
Page.
Home Page URL
http://www.pro-face.com/
Industrial Control Equipment
refer to UL508
see [a] in the
“Product List“
Standard for Process Control Equip-
ment
refer to
CSA-C22.2 No.142
see [b] in the
“Product List“
Product Model No.
Registration
Model No.
UL
c-UL
[a]
[b]
AGP3300H-L1-D24
3610005-03
9
9
AGP3300H-S1-D24
3610005-02
9
9
AGP3310H-T1-D24
3610005-01
9
9
AGP3300H-L1-D24
AGP3300H-S1-D24
AGP3310H-T1-D24
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"