Teledyne LeCroy CANbus TD and CANbus TDM - Operators Manual - Manual (Page 46)

CANbus Trigger, Decode, and Measure
46
CANbus-TD-TDM-OM-E RevB
Trigger Capability CANbus TD and TDM
# Data Bytes = 0 to 8. Data can be defined by nibble. Triggers on that
data pattern regardless of position.
Binary:
Any combination of 0,1, or X for 1-64 bits. Triggers on that data pattern
regardless of position.
Bit Rates 10, 25, 33.333, 50, 83.333, 100, 125, 250, 500, 1000 kb/s or user-defined
between 10-1000 kb/s.
Trigger Input
Any analog Channel or the EXT input.
Trigger Design Internal to oscilloscope, settable like any other oscilloscope trigger.
Search Capability CANbus TD and TDM
Search Options Search for Any Frame, Any Error or Frame ID in Hexadecimal format.
Measure and Graph
Capability
CANbus TD CANbus TDM
CAN Timing
Measurements Not Applicable CAN-CAN, CAN-Analog, Time@CAN,
CAN Message Bitrate.
CAN Data Extraction Not Applicable CAN-Value.
CAN Bus Load
Measurements Not Applicable CAN Bus Load %.
Graphing Functions Not Applicable Track, Trend and Histogram of CAN
measurements.