Teledyne LeCroy CANbus TD and CANbus TDM - Operators Manual - Manual (Page 44)

CANbus Trigger, Decode, and Measure
44
CANbus-TD-TDM-OM-E RevB
9. View the timestamps for each segment by selecting Vertical→Channels Status on the
menu bar. On the Show Status portion of the dialog, select Time. A display of timestamp
information for each segment in the sequence acquisition is shown.
10. Ten timestamps fit on the display at a time. You can choose which 10 to display by using
the Select Segment control. You can also page through the segments one at a time by
using the Adjust knob on the front panel.