Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.30 - Manual (Page 84)

76
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.3
• Wrap: Inhibits carriage returns in packets when they exceed the
width of the window.
• Idle Time Presentation: Causes IBTracer to display Idle Time
in one of two formats:
• Show Idle Time
• Show Idle in Symbol Time (1 symbol = 4ns)
• Point-of-View: Allows you to swap the transmit and receive
directions in a trace (packets labeled as 'Transmit' will become
labeled as 'Receive' and vice versa).¨ Swapping is also allowed in
the Tx/Rx cell in the Trace View.
• Fonts: Lets you define the appearance of Field and Data text.
• Trace Viewing Level: Lets you display the following elements in
the CATC trace: Packets, Transport functions, Management
Datagrams, Subnet Administration, Sockets Direct Protocol,
SCSI RDMA Protocol.
7.2 Saving and Loading Display Options
To save your Display Options settings for future use,
Step 1
Click Save to save the currently specified Display Options for use in
future sessions. Any file name can be specified, but you must use the
.opt extension. If no extension is specified, .opt is added by default.
Step 2
Click OK to apply any changes you have made to Display Options
and close this dialog box.
• Click Cancel to cancel any immediate changes you have made
and exit the Display Options menu.
• The Save as Default function is equivalent to the Save function,
specifying the file name default.opt. Whenever you start up the
analyzer, it automatically loads the default.opt file if one exists.
To load Display Options,
Step 1 Click Load.
A dialog box will open with a list of previously saved Display
Options.
Step 2
Select a previously saved *.opt file.
Step 3 Click Apply to apply your changes.