Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.30 - Manual (Page 28)

20
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.3
3.9 IBTracer Program Startup
You can start the IBTracer program from the desktop or from the installed
directory. The program always begins with its main screen active:
When the program is used with the IBTracer Protocol Analyzer attached to
the computer, you can set trigger conditions, record, monitor, and analyze
the activity of your InfiniBand device or fabric. When used without the
Analyzer, the software serves as a Trace Viewer for viewing traces made on
other systems.
3.10 Making a Recording
After installation, the software is configured to make a Snapshot recording
of InfiniBand traffic.
To make your first recording of this traffic,
Step 1
Connect InfiniBand cables to both InfiniBand connectors on the
front panel of the IBTracer 4X module and plug the other ends into
the device under test.