Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.30 - Manual (Page 34)

26
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.3
Automatic Updates
When the IBTracer software is updated, the software may become
incompatible with the BusEngine and Firmware. If a recording is attempted,
IBTracer displays a warning message and then automatically begins an
update process for the BusEngine and Firmware. If preferred, you can abort
this update and do the steps manually, as described later in this chapter.
To automatically update the BusEngine and Firmware,
Step 1 If needed, update the IBTracer software using the steps outlined in
"Software Updates" described above.
Step 2
Turn on the Analyzer.
Step 3
On the toolbar, click the button.
Because the BusEngine and/or the Firmware are incompatible with
the current IBTracer software version, an error message will appear
displaying your current versions and indicating what versions you
need to install.
Step 4
Click Yes.
The above window closes and the Analyzer Setup window opens.
Step 5
Click Update BusEngine or Update Firmware on the Analyzer
Setup screen.