Teledyne LeCroy IBTracer 4X - Users Manual Ver.2.30 - Manual (Page 80)

72
IBTracer 4X Protocol Analyzer User’s Manual CATC SW Version 2.3
analyzer is configured to trigger following the sixth MAD with a
user-defined data pattern, but if an error occurs anywhere during the count,
restart the count.
6.14 Saving Recording Options
To complete your Recording Options settings, use the features at the bottom
of the Recording Options screen. These features remain the same no matter
which of the three Recording Options screens you are working in.
• Click Save to save the currently specified Recording Options for
use in future recording sessions. Any file name can be specified,
though use of the .rec is recommended. If no extension is
specified, .rec is added by default.
• Click Load to load a previously saved *.rec file, thus restoring a
previous set of Recording Options.
• The Save as Default function is equivalent to the Save function,
specifying the file name default.rec. Whenever you start up the
Analyzer, it automatically loads the default.rec file if one exists.
• Click OK to apply any changes and close this dialog box.
• Click Cancel to cancel any immediate changes you have made
and exit the Recording Options menu.
6.15 Recording InfiniBand Traffic
To start recording InfiniBand traffic once the appropriate Recording
Options have been set,
Step 1 Select Record >Start from the Menu Bar
OR