IAI America IA-T-XD - Manual (Page 129)

17-3. Software reset
The controller’s software is reset. The data in memory that has not been written in flash ROM is
abandoned.
Select the F2 (SRst) key on the Ctl screen.
Mode flow:
When resetting the software, press the F1 (Yes) key.
When not resetting the software, press the F2 (No)
key. The screen returns to the Mode Selection
screen.
17-4. Error reset
The controller’s errors are reset. The message-level and action-reset-level errors are reset.
Unless the cause for the error is removed, the error occurs again.
Select the F3 (ERst) key on the Ctl screen.
Mode flow:
When resetting the error, press the F1 (Yes) key.
When not resetting the error, press the F2 (No) key.
The display returns to the Ctl screen.
126