IAI America IA-T-XD - Manual (Page 110)

14-4. Flash ROM writing
If data is only transferred to the controller after symbol editing, the edited program is erased when
the power is turned on again or software is reset.
To maintain the edited data even if the power is turned on again or software is reset, the data is
written in flash ROM.
Return to the Flsh screen with the ESC key from the edit completion screen.
To write the data in flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key.
The message “Please wait…” flashes during flash
ROM writing.
* Never turn off the power to the Controller at this
time.
When flash ROM writing is completed, the screen
returns to the Mode Selection screen.
107