IAI America IA-T-XD - Manual (Page 128)

17-2. Flash ROM writing
After the data in flash ROM has been erased, the data stored in the controller’s memory is written
in flash ROM.
Select the F1 (Flsh) key on the Ctl (controller item) screen.
Mode flow:
To write the data in flash ROM, press the F1 (Yes)
key.
If not, press the F2 (No) key. The screen returns to
the Ctl screen.
The message “Please wait…” flashes during flash
ROM writing.
* Never turn off the power to the Controller at this
time.
Return to the Clt screen with the ESC key.
125