IAI America IA-T-XD - Manual (Page 113)

Data input for axis No. 2
The display screen advances to the screen for
parameter No. 59. Since the axis No. 2 for the
parameter No. 58 is unedited, return to the edit
screen for the parameter No. 58 with the PAGE
DOWN key
Change the axis No. to 2 with the F4 (Dev+) key.
Enter 100 with the ten-key numeric pad and press
the return key.
Press the WRT key to transfer the parameter data to
the controller.
When continuing to edit the axis-specific parameters,
move the cursor to the parameter No. and enter the
parameter No. for editing.
When completing the axis-specific parameter editing,
press the ESC key to return to the Flsh screen.
Axis No. 2
110