IAI America RCS-C - Manual (Page 6)

 Before installing or adjusting the product or performing other operations on the product, display a sign that
reads, “WORK IN PROGRESS. DO NOT TURN ON POWER.” If the power is turned on inadvertently, injury
may result due to electric shock or sudden activation of an actuator.
[Operation]
 Turn on the power to individual equipment one by one, starting from the equipment at the highest level in the
system hierarchy. Failure to do so may cause the product to start suddenly, resulting in injury or product
damage.
 Do not insert a finger or object in the openings in the product. It may cause fire, electric shock or injury.
 Do not bring a floppy disk or other magnetic data storage medium within one meter of the product. The data
inside the floppy disk, etc., may be damaged due to the magnetic force generated by the magnet in the
product.
[Maintenance, Inspection, Repair]
 Do not touch the terminals when performing an isolation resistance test. Electric shock may result. (Do not
perform any withstand voltage test on a product that uses DC power supply.)
Note
[Installation]
 Do not place objects around the controller that will block airflows. Insufficient ventilation may damage the
controller.
 Do not configure a control circuit that will cause the load to drop in case of power failure. Configure a control
circuit that will prevent the table or load from dropping when the power to the machine is cut off or an
emergency stop is actuated.
[Installation, Operation, Maintenance]
 When handling the product, wear protective gloves, protective goggles, safety shoes or other necessary gear
to ensure safety.
[Disposal]
 When the product becomes no longer usable or necessary, dispose of it properly as an industrial waste.
Others
 IAI shall not be liable whatsoever for any loss or damage arising from a failure to observe the items specified
in “Safety Precautions.”
 If you have any question regarding the product, please contact your nearest IAI sales office. The addresses
and phone numbers of our sales offices are provided at the end of this operation manual.