IAI America RCS-C - Manual (Page 46)

36
3.2.3 Signal Tables of Connectors and Terminal Blocks

Pin assignments of the SIO connector
Pin No. Signal name Function
1 (+5V) (5-VDC power output) or (preliminary signal terminal)
2 SGA Positive logic side of the line transceiver I/O
3 GND Communication ground
4 SGB Negative logic side of the line transceiver I/O
5 GND Communication ground
6 (+5V) 5-VDC power output

Pin assignments of the main communication port
Pin No. Signal name Function
1 SGA Serial communication
2 SGB Serial communication
3 5V 5-V power output
4 EMGS Emergency-stop status
5 EMGA *1
6 24V 24-V power output
7 GND Ground
8 ENGB *1
*1 Used to actuate an emergency stop (contact b).
Short these pins to cancel an emergency stop.
Motor connector [Molex 5569-04A1]
Signal name Connected wire
PE Motor FG
U Motor phase U
V Motor phase V
W Motor phase W