IAI America RCS-C - Manual (Page 4)

[Installation]
 Do not use this product in a place exposed to ignitable, inflammable or explosive substances. The product
may ignite, burn or explode.
 Avoid using the product in a place where the main unit or controller may come in contact with water or oil
droplets.
 Never cut and/or reconnect the cables supplied with the product for the purpose of extending or shortening the
cable length. Doing so may result in fire.
[Operation]
 If you are using a pace maker or other mechanical implant, do not come within one meter of the product.
Doing so may cause the pace maker, etc., to malfunction due to the strong magnetic force generated by the
product.
 Do not pour water onto the product. Spraying water over the product, washing it with water or using it in water
may cause the product to malfunction, resulting in injury, electric shock, fire, etc.
[Maintenance, Inspection, Repair]
 Never modify the product. Unauthorized modification may cause the product to malfunction, resulting in injury,
electric shock, fire, etc.
 Do not disassemble and reassemble the product. Doing so may result in injury, electric shock, fire, etc.
Warning
[General]
 Do not use the product outside the specifications. Using the product outside the specifications may cause it to
fail, stop functioning or sustain damage. It may also significantly reduce the service life of the product. In
particular, observe the maximum loading capacity and speed.
[Installation]
 If the machine will stop in the case of system problem such as emergency stop or power failure, design a
safety circuit or other device that will prevent equipment damage or injury.
 Be sure to provide Class D grounding for the controller and actuator (formerly Class 3 grounding: Grounding
resistance at 100  or less). Leakage current may cause electric shock or malfunction.
 Before supplying power to and operating the product, always check the operation area of the equipment to
ensure safety. Supplying power to the product carelessly may cause electric shock or injury due to contact
with the moving parts.
 Wire the product correctly by referring to the operation manual. Securely connect the cables and connectors
so that they will not be disconnected or come loose. Failure to do so may cause the product to malfunction or
cause fire.
[Operation]
 Do not touch the terminal block or various switches while the power is supplied to the product. Failure to
observe this instruction may result in electric shock or malfunction.
 Before operating the moving parts of the product by hand (for the purpose of manual positioning, etc.), confirm
that the servo is turned off (using the teaching pendant). Failure to observe this instruction may result in injury.
 Do not scratch the cables. Scratching, forcibly bending, pulling, winding, crushing with heavy object or
pinching a cable may cause it to leak current or lose continuity, resulting in fire, electric shock, malfunction, etc.