SecurityMan iCamDVR (after Dec. 2011 shipment) User Manual

Page 55

55 | SecurityMan

Picture Quality – is image picture quality during transmis-
sion. Picture quality ranges from Lowest, Low, Medium,
Higher, & Highest levels. The default value is higher.

NoTICe

The HTTP, Data, and Command ports can be altered or change

at anytime to avoid conflict.

Remote WebCam Live Surveillance
On the client side or the remote accessing computer(s),
open IE 6.0 or above, type in the WebCam server IP address
of the hosting computer in the Address (URL) to get to the
screen as shown below in figure 84. Select yeS to allow
unknown publisher program to proceed for the remote
client computer(s) to connect and a windows with a login
button will show as administrated in the picture below. If
an “Internet Explorer- Security Warning: Do you want to
run the ActiveX Control? Name: VideoOCX Active Control
Module” comes up, please click on “RUN” to proceed.

NoTICe

In case the HTTP port setting is changed from the default port

80 to 81, connect to the host using the IP server of the host

follow by a port number. For example, the server’s IP address

is 211.148.96.234, and the port number is 81, then input

http://211.148.96.234:81..

Click on the Login icon button and a login
windows will appear as shown below. Confirm User Name,
Password, Data Port and Command Port to be correct, click

figure 84 - Internet Remote access