SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 32)

32 | SecurityMan
If the settings are not input in correctly or wrong, there will
be some pop-up window showing corresponding warning
message. Please check with your local email(s) provider
for the correct SMTP, Port, User Name, and Password.
Check the “attachment” selection to enable picture at-
tachments via email. When the alarm triggered the pres-
ent live image will be sent to the appointed mailbox by
ways of attachment(s) as illustrated in figure 41 below.
Camera Name, Display Time, Image Format, and Resolu-
tion can be selected and setup as desired to enhanced and
help identify the image attached when an event occurred.
The Set Mail Interval ranges from 5, 10, 20, 30, 60, 120
(2min), 300 (5min), 600 (10min) seconds. This is the dwell
time that it will take before an additional email to be active
until the next event email occurs. During the dwell time
or Set Mail Interval time if any events occurred during
this time will be accumulates and all the pictures will be
sent when the time interval expired. For example; if the
Set Mail Interval is set to 300 seconds (5 minutes) and an
event occurred and emailed out at 7:07:07am, any other
event(s) that occurred after this first occurrence will ac-
cumulates in pictures and events and will be sent out 5
minutes later as illustrated below:
NoTICe
Only one picture will be sent per every alarm event. If Set
Mail Interval is in use, an accumulated pictures and events list
will be sent out in a single email with multiple events list and
multiple pictures.
figure 41 - alarm email attachment Setup
figure 42 - Set Mail Interval email Sample