SecurityMan iCamDVR (after Dec. 2011 shipment) - Manual (Page 54)

54 | SecurityMan
ReMoTe SURVeILLaNCe & PLayBaCK
Remote Live Surveillance
iCamDVR surveillance system supports Remote Surveillance
access through Internet or Intranet. SuperDVR is required
to be opened and logged in on the hosting computer for
remote access feature to function. Ensure the Internet
configuration under the basic configuration are enabled
and properly configured please refers to figure 83 below
for more detail. The computer with SuperDVR software
installed will become an Internet Web Cam server.
SuperDVR utilizes the IP assigned to the computer as
the IP configuration for remote access. Remote access
provides high quality real time image from the server and
also feature remote PTZ controls.
Remote Intranet access; remote computers in the
intranet simply input in the IP address of the computer
hosting the iCamDVR by using the Internet Explorer 6.0
or above browser and the WebCam window will appear.
Click on Login to log into the iCamDVR via intranet.
Remote Internet access; similar to remote intranet access
only uses the Wide Area Networking IP address via IE 6.0 or
above to access. A few data/command ports are require to
set opened from the router in order for the video data to
transmit and carry through to the internet.
Internet Configuration (in Basic Configuration)
Start by placing a check mark on Net Service in Basic
Configuration to enable web camera service as shown
below in figure 83. The HTTP Port, Data Port, Command
Port and Picture Quality will become enabled.
HTTP Port – is a web service & downloading service port,
default port is 80.
Data Port – is data/video transmission port, default port is
1160.
Command Port – control command port, port dedicated
for communication on the internet, default port is 1159.
NoTICe
Intranet does not require ports to be open. See Remote Web-
Cam Live Surveillance on page 55 for detail.
figure 83 - Internet Configuration