SecurityMan HomeDVR-KT1B - Manual

Package Contents
HomeDVR, Remote Control, Camera (SM-302), 100ft AVP Cable, 2 AC Adapters & Accessories.
Installation
i) Connect one end of the 100ft power receptacle to the
camera’s power input socket. Connect the A/C adapter
(8VDC 300mA) to the other end of the 100ft cable and
then connect the power adapter to an electrical outlet
as shown to the right.
ii) Next, connect one end of the 100ft AVP cable to the
camera’s yellow (video) socket and red (audio) socket
as shown to the right.
iii) Using one of the AV cable’s provided, connect the
3.5mm jack into the HomeDVR ”AV IN 1” port and use
the opposite end (yellow/white) to connect the camera
to the DVR. Connect the cameras red audio socket to
white and yellow to yellow of the 100ft AVP cable [RCA (f)
to RCA (f) adapter apply] as illustrated on the right.
iv) Connect the AV (audio/video) cable from the AV output
of the HomeDVR to a monitor or a recorder source
(ie. CCTV monitor, LCD monitor, TV, DVR, recorder, & etc).
Turn on the monitor source and change the channel on
the monitor to AV input (ie. LINE1, LINE2, VIDEO1, VIDEO2, & etc.), as illustrated to the right.
v) Insert an SD card into the SD card slot of the HomeDVR and then turn the power switch to the ON
position.
NOTE: Please refer to the user’s manual for information on how to use and configure the
HomeDVR. SD card not included.
HomeDVR-KT1B Quick Start Guide
One Weatherproof Bullet Color Camera w/100ft Cable
and SD DVR