Ronan X96S MASS FLOW GAUGE - Manual (Page 73)

69
MODEL X96S
Process Computer: Microprocessor-based unit with a liquid crystal display, push-button interface,
HART

Communications, process control outputs, process condition inputs, serial
communications.
Chassis: 19” rack mount, surface mount, or panel mount.
Enclosure: Standard NEMA-4
Stainless Steel NEMA-4X
Explosion Proof
Electrical: Power inputs: 90-240VAC +/-15%, 50-60 Hz; 24VDC +/-15%
Environmental: Ambient temperature range: 0 degrees to 140 degrees F (18 degrees to 60 degrees
C)
Humidity: 90% non-condensing
Electronics: Processor: Embedded 80x86 compatible processor
Memory: flash, static RAM, battery backup RAM
A/D Converters: 16-bit, dual slope, auto-zeroing
Display: graphic LCD, fluorescent back-lit
Inputs:
(Optional) Tachometer: 0-10VDC, 4-20mA, or pulse rate TTL load
Detector: 0.42-2.4VDC or pulse TTL
Temperature Compensation: 100 ohm Pt, 120 ohm Ni, or 4-20mA
(mass flow or density)
Outputs: Three 4-20mA; one assigned to each channel
Four single set-point SPDT relays: 3 amp at 28VDC or 240VAC
Remote totalizer pulse: 20 msec pulse, open collector 50mA at 24VDC
Display Units: (Engineering units per gauge)
Level: in, ft, mm, cm, or m
Density: % solids, SpG, Baume H, Baume L, or API, Brix, Ball or Twadell
Mass Flow: lb/min, Kg/min, mT/min, mT/hr, sT/min, sT/hr, lT/min, or lT/hr
Weight: lb/min, kg/min, mT/hr, sT/hr, kg/hr, or kg/hr, or oz/min
Computer Interface: HART  Communications