Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 52)

Section 4: Configuring Databank
6/08 52 51195 Rev. 1
Changing Product Information
1. Type in the desired Product Code ,
or select the Product Code from the
Menu Tree .
─ The descriptor fields fill with stored
information about that Product.
2. Double-left-click within any field to
highlight all its information.
3. Type in the correct information.
4. Press to accept all the
Product information and record it in
the DataBank database.
NOTE: All DataBank Products are sorted numerically by Product Code.
Deleting a Product
1. Highlight the Product Code to be deleted in the Menu Tree .
2. Delete the Program record by pressing .
3. When prompted, verify that the record should be deleted.
This permanent change takes place immediately.