Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 15)

Section 1: General Information
6/08 15 51195 Rev. 1
Users’ Responsibility
9 All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability
to be adjusted or calibrated to performance specifications may be charged to
warranty.
9 Absolutely no physical, electrical or program modifications other than selection of
standard options and accessories are to be made to this equipment.
9 The equipment consists of printed
circuit assemblies which must be
handled using ESD handling
procedures, and must be replaced as
units.
─ Replacement of individual
components is not allowed.
─ The assemblies must be properly
packaged in ESD protective
material and returned intact for
replacement credit per normal
procedures.