Installing databank from a cd disk, Cd disk, Green bars – Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals User Manual
Page 19: Fairbanks technical services
Section 2: Program Introduction & Installation
6/08
19
51195 Rev. 1
INSTALLING DATABANK FROM A CD DISK
Follow these steps to install the DataBank
Program from a
CD Disk
.
1. Insert the Program CD Disk into the
player.
2. After the program introduction loads,
press .
3. Press .
•
If movement forward of the
green bars
takes longer than five (5) minutes, the
program is probably stalled.
•
If so, or if any error messages appear,
press , then repeat the
installation process.
•
If any other problems occur, or if the
Program Installation continues to fail, call
Fairbanks Technical Services
for
immediate resolution.
If movement of the
green bars
takes longer than
five minutes, press , then reinstall.