Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 33)

Section 3: Configuring LabelBank
6/08 33 51195 Rev. 1
Configuration Menu/
Products
FIELD DESCRIPTION
Product List
•
Product Code
The Products Menu displays and scrolls through the Product List.
− The Products Menu displays in View Only Mode .
− A user can view all the products available in the LabelBank Program ,
noting all information about each item without being able to change
anything.
− The Product Code is assigned for inventory and tracking purposes, and
also provides a unique identifier for each item.
•
Manufacturers
Code
The Manufacturers Code identifies the manufacturer of the item.
•
Product (No.)
• Displays a product code which will override the normal Product Code .
• If this field is not blank, its value will be used in the EAN-128 barcode.
• It allows a food plant to code a product for a reseller, using the reseller’s
product code, not the actual packager’s product code.
•
Description #1 - 7 DataBank allows configuring the primary Desc. Line 1 with up to thirty-two
(32) characters, and the secondary Desc. Lines 2 thru 7 configuring with
sixty-four (64) characters.
− When the ticket space is limited to 3.123”, printing in LabelBank allows
up to twenty-three (23) characters per description field.
•
Tare Wt.
Displays the product’s Tare Weight.
•
Min. / Max Wt.
Displays the product’s minimum and maximum package weights.
−
If any product is beyond these parameters, the label cannot be
printed.
− When the Auto Print feature is on, the Minimum Weight must be
greater than zero (
0
).
•
Units
Displays either “ lb ” or “ kg ”.
•
Boxes/Pallet
Details how many boxes are loaded onto each before printing a pallet label.
9
The Products List displays in the
View Only Mode so important
information cannot be altered or
deleted from this window. Product
edits are made in the
DataBank
Program.