Fairbanks LabelBank/DataBank Application For the FB3000 Series Programmers Manuals - Manual (Page 14)

Section 1: General Information
6/08 14 51195 Rev. 1
Electronic Component Care
• Much of the equipment consists of printed circuit
assemblies, which must be installed using
ESD
handling procedures
.
• Replacement of individual components is not
allowed.
• All components must be returned intact for
replacement credit per normal procedures.
• All electronic and mechanical adjustments are
considered to be part of the installation, and are
included in the installation charge(s).
• Included is any required computer programming or
upgrades.
• Included are any accuracy and/or
• The AC receptacle / outlet shall be located near the Indicator and easily
accessible.
Electrical connections other than those specified may not
be performed.
Absolutely NO physical, electrical or program modifications other
than selection of standard options and accessories can be made
by customers to this equipment
Repairs are performed by Fairbanks Scales Service Technicians
and Authorized Distributor Personnel ONLY!
Failure to comply with this policy voids all implied and/or written
warranties
W A R N I N G !