E-Mon E-PS-S-HV-RTU - Manual (Page 48)

Chapter 3 Using Front Display Data Displays
48 PowerSmart Socket Power Quality Meter
Device Diagnostics Display
The diagnostics display shows device diagnostic messages
recorded as a result of the meter self-test diagnostics during
start-up and operation.
If there are more pages, use a short press on the
SCROLL button to scroll through the entire list of
messages.
Extended press SCROLL + SELECT/ENTER is a
shortcut for immediate entering the password-
protected diagnostics reset menu.
If there are diagnostic messages, the diagnostic icon on
the status bar flashes until you clear the device diagnostics.
Some of the diagnostics events are cleared automatically as
the event source disappears. See
Device Diagnostic Codes in
Appendix H for a full list of diagnostic messages and their
meanings. See
Clearing Device Diagnostics for information on
how to clear the device diagnostics from the display and via
Power Software.
The diagnostic icon can be disabled or enabled via the Display
Setup menu.