E-Mon E-PS-S-HV-RTU - Manual (Page 142)

Chapter 6 Device Control and Upgrading Clearing Device Diagnostics
142 PowerSmart Socket Power Quality Meter
You need not update the clock in your meter if the clock is
synchronized to the external GPS master clock.
Clearing Device Diagnostics
Using the Front Display
See the following section Reset of Accumulators and Log Files
on how to clear the device diagnostics from the front display.
Using Power Software
Via Power Software, you can both examine the present
device diagnostics status, and clear it.
To enter the Device Diagnostics dialog, select Device Control
from the Monitor menu, and then click on the Device
Diagnostics tab.
To clear the device diagnostics events, click on Clear.
Refer to Device Diagnostic Codes in Appendix H for the list of
diagnostic codes and their meanings.
You can also clear the device diagnostics via the Clear
Operation/Event Counters entry in the Reset dialog (see the
following section).
Reset of Accumulators and Log Files
Using the Front Display
Select Reset from the main menu. See Viewing and Changing
Setup Options in Chapter 3 for information on navigating in
menus.