Electro Cam PS-6144 Series - Manual (Page 51)

3-23 Programming
Pulse Copy (cont’d)
Example Generate a train of pulses as follows:
Pulse On Off
1 0 50
2 100 150
3 200 250
4 300 350
5 400 450
6 500 550
7 600 650
8 700 750
9 800 850
10 900 950
Each pulse is 50 increments wide, separated from the next pulse by 50 increments.
Program PULSE COPY as follows:
PROGRAM:---< Program to add pulses to;
Enter number, then SEL to go to next screen
CHANNEL:---< Channel to add pulses to;
Enter number, then SEL to go to next screen
ON: 0< "On" time of leading edge of first pulse;
Enter 0, then ENT & SEL to go to next screen
OFF:950< "Off" time of trailing edge of last pulse;
Enter 950, then ENT & SEL to go to next screen
COUNT 10< Total number of pulses to be added;
Enter 10, then ENT & SEL to go to next screen
DURATION: 50< Duration of each pulse added;
Enter 50, then ENT & SEL to go to next screen
DURATION: 50
EXECUTE< Move cursor to EXECUTE, then press SEL to
generate pulses.
DURATION: 35
COMPLETE< COMPLETE indicates pulses have been generated
<-P-> CH: 1 ON: 0 OF: 50
Move cursor to OF and use arrow keys to
review pulse setpoints
Go to SETPOINTS to confirm the pulse train: