Electro Cam PS-6144 Series - Manual (Page 105)

A-1 Appendix
PS-6144 Controller Specs
Electrical
Input Power 20-30 VDC. Keypad/display is powered from controller.
Input Current 500 mA maximum (control only)
Power Consumption: 35 W
Permanent Memory: EEPROM (no battery required)
Accessory Power Out: 20-30 VDC, 250 mA Max (same source and voltage as input power)
Environment
Operating Temp: 0
°
to 55
°
C (32
°
to 131
°
F)
Storage Temp: -40
°
to 70
°
C (-40
°
to 160
°
F)
Humidity: 95% maximum relative non-condensing
NEMA Rating: Keypad/Display: NEMA 4
Physical
Overall Dimensions: See Figure 4
Weight: Controller: 3.5 lbs (1.6 kg). Keypad/Display: 0.5 lbs. (0.2 kg)
Mounting
Controller: Brackets accept EN-50035 (“G” profile) or EN-50022 (“Top Hat” profile) DIN rail.
Keypad/Display: Mounts up to 1000' from controller. Multiple keypads may be connected to one controller.
Inputs
DC Inputs: 16 sinking or sourcing DC inputs, optically isolated.
Input ON State Voltage: 10-30 VDC
Input Current: 11 mA @ 24 VDC
Program Select Response: 100 ms typical; may be longer with large numbers of setpoints.
Response of All Other Inputs: 1-2 scans
Outputs: PS-6144-24-(P16 or N16)M09
Real World Outputs: Up to nine Slimline modules may be mounted on controller. Modules may be any mix of AC,
DC, reed relay, and up to two analog. All modules optically isolated.
DC (Transistor) Outputs: 16 sinking (N16) or sourcing (P16), optically isolated. Sinking or sourcing must be specified on
order.
Outputs: PS-6144-24-M17
Real World Outputs: Up to 17 Slimline modules may be mounted on controller. Modules may be any mix of AC, DC,
reed relay, and up to two analog. All modules optically isolated.
Analog Output
Output Types: 4-20 mA or 0-10 VDC, proportional to RPM.
Resolution: 12 bit
Update Frequency: 10 times/sec minimum
Linearity:
±
0.3% of full scale @ 25
°
C (77
°
F)
Set-up: Offset and full scale RPM are programmable.
Operation
Scan Time: 300-500 ms (exact time determined by programming)
For higher speeds, interrupt-driven versions available—consult factory.
Position Resolution: 10 bits (1024 increments). 12 bits (4096 increments) available with “-H” option.
Speed Compensation: Programmed in 0.1 msec steps. 16 individually compensated outputs max. Updated ten times
per second. Separate leading/trailing edge compensation available with option “-L” (update time
typically five times per second).
Output Timeout: 1.0 ms time base (accuracy: +1, -0 ms)
Number of Timed Outputs: Four maximum
Multiple Programs: 48 programs standard (256 available with “-F” Option)
Total Pulse Memory: 1258 pulses standard (4589 available with “-F” Option)
Pulses per Program: 512 maximum standard (512 available with “-F” Option)
Pulses per Output: 512 maximum standard (512 available with “-F” Option)
Maximum Speed: 3000 RPM
RS-232 Serial Communication
Port Types: 1 RS-282 or 1 RS-422/485—R-485 can be configured as a “Multi-Drop” network.
Baud Rates: 4800, 9600, 19.2K, 38.4K