Magnum Venus Plastech Megaject RTM Pro Revison 7_0 - Manual (Page 6)

Megaject RTM Pro Manual – Revision 7.00 – 13
th
APRIL 2006
1.1. Machine overview
The touch screen, or Human Machine Interface (HMI) is mounted in an adjustable
housing on the top of the machine, along with the START and STOP buttons. This
unit, shown in Figure 1.0 provides the operator interface for the machine, from which
all machine operations are controlled.
The e-stop button is mounted next to the screen housing on the top of the machine, to
facilitate easy access in an emergency.
Figure 1.0 – Operator interface.
Bay 1 is shown in Figure 1.1 and contains all of the electrical control equipment such
as the Programmable Logic Controller (PLC).
Figure 1.1 – Bay 1
Start button
Stop button
E-Stop