Magnum Venus Plastech UltraMAX Shut-Down Checklist - Manual

ACTIVITIES MUST BE DONE IN THE SEQUENCE SHOWN, AND MUST BE CHECKED OFF AS COMPLETED. USE
THIS CHECKLIST IN CONJUNCTION WITH THE OPERATING MANUAL FOR THE ULTRAMAX UNIT. THIS
SEQUENCE FOLLOWS ON FROM “SET-UP FOR FIT ®
CHECKLIST.
ABNORMAL CONDITIONS OBSERVED AND CORRECTED
Abnormal Condition
 when
corrected
OPERATORS NAME _______________________________________ DATE: ________________
SIGN OFF WHEN SHUT DOWN CHECKS ARE COMPLETED : _________________________
UltraMAX™ Shut-Down Checklist
ACTIVITY
NO.
ACTIVITY 
WHEN
COMPLETED
Priority Put on Respirator as specified for spray painting,
Protective Clothing, Eye Protection, and PVC
Gloves
1 Flush the gun with solvent.
2 Wipe the face of the nozzle after flushing.
3 Turn off the main inlet air ball valve at the manifold.
4 Release the solvent flush tank pressure.
5 Remove the nozzle and clean it.
6 Remove the Mix Housing and clean it.
7 Wipe the gun block face with a clean rag.
8 Hang the gun with the gun block exit holes facing
down.