beautypg.com

Replacing resin pump seals – Magnum Venus Plastech Megaject RTM Pro Revison 7_0 User Manual

Page 48

background image

Megaject RTM Pro Manual – Revision 7.00 – 13

th

APRIL 2006

6.5. Replacing Resin Pump Seals

In order to service internal resin pump seals first pump out any resin from internals by
placing system on recirculation. It is also advisable to clean internals with solvent
after resin removal before service. Do this by re-circulating 5 litres solvent through
resin pump and finally pumping the solvent out from the system.

NOTE:
Before disassembling pumps, Switch Off machine and Isolate machine from
air supply.