Basic operation without a lap pad, Printing diagnostic/calibration tickets – Liquid Controls LCR Setup & Operation User Manual
Page 37

37
Basic Operation without a Lap Pad
DELIVERY & SELECTIONS MENU CONTINUED
PRINT Position (Product #/Totalizer) Continued
A shift ticket is printed when the Selector Switch is placed in the SHIFT PRINT Position for more than 2 seconds and a
printer is loaded with paper and available to print the ticket. (NOTE: If the Selector Switch is turned to SHIFT PRINT
and then out of SHIFT PRINT in less than 2 seconds, a Diagnostic/Calibration Information ticket is printed). Delivery
Total
is the initial display. The display will update every 15.625 ms.
Press SELECT to advance to Product Number Display:
The current active Product Number is displayed. If a delivery is not active, the digit will be flashing, indicating
that it can be changed. If the display is NOT flashing, it cannot be changed. Press
INCREASE
to scroll through
the options. These options are Prod 1, Prod 2, Prod 3, or Prod 4, depending on the number of product s
programmed during calibration. When the desired option has been chosen, press SELECT.
The display will advance to:
This displays the five most significant digits of the GROSS or NET Shift totalizer. Press INCREASE to return
to the Product Number display. Press SELECT to advance to:
Printing Diagnostic/Calibration Tickets
If a delivery was terminated due to a pulser failure, temperature probe failure or other fault, the last line on the delivery
ticket will read, "*FAULT: PRINT DIAGNOSTICS TICKET*".
A Diagnostic Ticket is printed when the Selector Switch is turned to the
SHIFT PRINT
Position for less than two
seconds. This ticket cont ains the same information found on the calibration ticket that print s when the Calibration
Mode is exited, but does not increment the calibration number or require a Weights & Measures seal to be broken.
This allows the operator to spot check the calibration of the register and/or diagnose problems with the unit.
The ticket
will show any problems on the last line to assist in troubleshooting the problem.
This displays the five least significant digits of the GROSS or NET Shift totalizer. The shift totalizer is a combination
of these two screens. The total in this example is “543,216,789.0” unit s. Press INCREASE to return to the
previous totalizer display. Press SELECT to return to Delivery Total.
P r o d 1
L6789.0
H 1 2 3 4 5