Liquid Controls LCR Setup & Operation - Manual (Page 10)

10
Lap Pad Calibration & Set-Up
STEP 2: SECURITY
Press the M1 Key to access a top-level menu. Press LLLLL to scroll to the SECURITY menu. Press ENTER to
gain access to the secondary menu.
USER KEY (Password)
Use this field to enter the owner/office password. To enter a password, press ENTER to drop into the
data entry field. Enter a p assword using up to 10 alphanumeric characters. Press ENTER. This
password will be required in the future to unlock the system in order to gain access to secured menu
and data entry fields. This password will also be needed to change the time using the LCR control
buttons. If it is desired to have access to time adjustment, the USER KEY must be numeric only and
contain 5 digits.
Press LLLLL and the cursor will move to:
SECURITY^
This field is used to lock the system. Press ENTER to drop to the bottom field. Use i to scroll between
LOCKED
and UNLOCKED. Press ENTER to select the desired option. While the system is LOCKED,
the operator is unable to change system dat a other than GROSS and NET PRESETS, PRODUCT
CODE
, PRODUCT NAME, and NO-FLOW TIMER.
NOTE
: The LCR is shipped LOCKED from the factory.
Press M1 to return to the top-level menu. Press LLLLL to scroll to GENERAL SETUP.
STEP 3: GENERAL SETUP
The fields in this menu are not specific to any of the four possible product calibrations, therefore the
Selector Switch does not have to be in the CALIBRATION position to allow data entry in many of these
fields and changes can be made without breaking Weights & Measures seals.
Press ENTER and the cursor will move to:
DATE FORMAT^
This field is used to determine in which format the date will be displayed and printed: month first or day
first. Press ENTER and the cursor will drop to the second line. Now you can use the arrow keys to
select the format, either month first ( MM/DD/YY) or day first ( DD/MM/YY). When the choice is dis-
played, press ENTER and the cursor will move back to the top line.
Press LLLLL and the cursor will move to:
DATE MM/DD/YY
(or DD/MM/YY depending on the previous field).
This field is used to set the LCR internal calendar . The LCR updates it s calendar and will print the
correct date on delivery ticket s. Press ENTER and the cursor will drop to the bottom line. Enter the
current date on the keypad using only numbers. Press ENTER and the cursor will move back to the top
line.
USER KEY
0001 SECURITY^
UNLOCKED
Security - Screen 1
General Setup - Screen 1
TIME HH:MM:SS
9:05:24 DATE
10/6/2002 DATE FORMAT^
MM/DD/YY