Liquid Controls LCR Setup & Operation - Manual (Page 28)

28
Lap Pad Basic Operation
PRESET DELIVERY WITH A LAP PAD CONTINUED
PRESET
The PRESET amount can be entered here. A preset of GROSS or BOTH must have been selected in
GENERAL SETUP.
REMAINING
This field displays the number of units remaining for the current delivery. DISPLAY ONLY.
UNITS^
This field displays delivery units selected during CALIBRATION: GALLONS, LITRES, CUBIC METERS,
LBS
, KGS, BARRELS, and OTHER.
Press LLLLL to advance to:
PRICE/UNIT
Enter value.
TAX/UNIT
Enter unit tax if applicable.
%TAX
Enter % Tax rate if applicable.
Press LLLLL to advance to:
SUBTOTAL
Price per unit times quantity. DISPLAY ONLY.
TAX
Total of all taxes for delivery. DISPLAY ONLY.
TOTAL
Sum of SUBTOTAL plus TAX. DISPLAY ONLY.
Press LLLLL to advance to:
AUX OUT 1^
This field activates optional output s, e. g. pump control, additive injection, alarms, etc. Choices are
OFF
, ON, ON DURING DELIVERY or MONITOR FLOWRATE. MONITOR FLOWRATE becomes
active at the beginning of each delivery . If the flowrate meet s or exceeds 40 unit s/time, the output
deactivates. If the flowrate does not meet or exceed 40 units/time, the output remains active.
AUX OUT 2^
This field can be programmed to indicate FLOW DIRECTION or it can be programmed similar to the
AUX OUT 1^
functions of OFF, ON, or ON DURING DELIVERY.
Delivery & Preset - Screen 6
TOTAL
0.000 TAX
0.000 SUBTOTAL
0.000
Delivery & Preset - Screen 7
AUX OUT 2^
FLOW DIRECTION
AUX OUT 1^
ON DURING DELIVERY
Delivery & Preset - Screen 5
PRICE/UNIT
0.000 %TAX
0.000 TAX/UNIT
0.000