Aastra Telecom SISIP 57I CT - Manual (Page 463)

Hard Key Parameters
41-001160-00, Rev 01 Release 2.0 A-121
Configuration Parameters
Appendix A Top Softkey Settings for 57i and 57i CT
Parameter –
topsoftkeyN type
Top Softkeys->Type
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, .cfg
Description The type of softkey to configure. Valid types are:
•
none - Indicates softkey is disabled.
• line - Indicates softkey is configured for line use.
• speeddial - Indicates softkey is configured for speeddial use.
• do not disturb (dnd)- Indicates softkey is configured for do not
disturb on the phone. This option is "Do Not Disturb" in the Aastra
Web UI).
• blf - Indicates softkey is configured for Busy Lamp Field (BLF) use.
User can dial out on a BLF configured key.
• list - Indicates softkey is configured for BLF list use. (This option is
BLF/List in the Aastra Web UI). User can dial out on a BLF List
configured key.
• xml - Indicates the softkey is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
• flash - Indicates the softkey is set to generate a flash event when it is
pressed on the 57i and 57i CT, or a feature key is pressed on the 57i
CT handset. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when the
call is not on hold).
• sprecode - Indicates the softkey is configured to automatically
activate specific services offered by the server. For example, if the
sprecode value of *82 is configured, then by pressing the softkey, *82
automatically activates a service provided by the server.
• park - Indicates the softkey is configured to park incoming calls when
pressed.
• pickup - Indicates the softkey is configured to pick up parked calls
when pressed.
• lcr - Indicates the softkey is configured for “last call return” when
pressed.